Microstructure & Tribological Performance of Alumina-3wt% Titania Coatings Produced by APS

Authors

  • Mokhtar DJENDEL University of Laghouat
  • Omar ALLAOUI University of Laghouat
  • Mourad MAAZOUZ University of M'Sila
  • Rabah BOUBAAYA University of Bordj Bou Arreridj

Keywords:

Plasma spray, Alumina–3wt.% Titania Coatings, Microstructure, XRD, Wear behavior

Abstract

Al2O3-3wt%TiO2 coatings were deposited by atmospheric plasma spraying (APS). The microstructure and phase composition of the coatings were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM). The wear and friction properties of Alumina–3wt.% titania coatings against a steel ball under dry friction conditions were examined. The microstructure result and the phase of the spray coating is analyzed and presented. In addition, wear behavior of the sprayed coating are evaluated for final coating performance. , test results showed that increasing some process parameters increased the performance of mechanical properties of coating and gave the lowest friction coefficient value of coating.

Downloads

Published

2020-07-31

How to Cite

DJENDEL, M., ALLAOUI, O., MAAZOUZ, M., & BOUBAAYA, R. (2020). Microstructure & Tribological Performance of Alumina-3wt% Titania Coatings Produced by APS. International Journal of Computational and Experimental Science and Engineering, 6(2), 88–91. Retrieved from https://ijcesen.com/index.php/ijcesen/article/view/119

Issue

Vol. 6 No. 2 (2020): IJCESEN

Section

Research Article

License

Copyright (c) 2023 International Journal of Computational and Experimental Science and Engineering

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.