Development of sawdust in cement particle board using eco-friendly process
DOI:
https://doi.org/10.22399/ijcesen.1191Keywords:
Cement, Eco-Friendly Process, Particle, CO2Abstract
Environmentally sustainable and effective methods of recycling industrial waste are needed due to its continuous rise. This study therefore looked at whether sawdust waste might be used to make cement-bonded particleboards and how to improve the sawdust's compatibility with cement through the use of physical pretreatment techniques, the addition of nano slag, and rapid carbonation curing. Each test was conducted using a separate set of manufacturing setups, including treated and untreated wood, CO2 solidification, nano-slag addition, and sawdust/cement ratios of 20%, 30%, and 40%. The mechanical properties of the produced particleboards were experimentally evaluated, including density (D), water absorption (WA), thickness expansion (TS), and flexural strength (BS). The microstructure of the cement particleboards was analyzed using SEM or scanning electron microscopy. The results showed that employing the accelerated CO2 curing procedure for sawdust particleboards improved the mechanical and microstructural properties of the sawdust-treated cement bonded particleboards. The SEM micrographs demonstrate that some of the carbonate crystals both protruded from sawdust surfaces and diffused into the cell walls and cavities.
References
Mayer, A.K., Kuqo, A., Koddenberg, T. and Mai, C. (2022). Seagrass-and wood-based cement boards: A comparative study in terms of physico-mechanical and structural properties. Composites Part A: Applied Science and Manufacturing. 156, 106864. https://doi.org/10.1016/j.compositesa.2022.106864 DOI: https://doi.org/10.1016/j.compositesa.2022.106864
Owodunni, A.A., Lamaming, J., Hashim, R., Taiwo, O.F.A., Hussin, M.H., Mohamad Kassim, M.H., et al. (2020). Adhesive application on particleboard from natural fibers: A review. Polymer Composites. 41(11);4448-4460. https://doi.org/10.1002/pc.25749 DOI: https://doi.org/10.1002/pc.25749
Satar, N.H.A.M. and Ismail, L.H. (2023). The Assessment of Alternative Low-Cost Construction Materials and Techniques for Wall Structure. Recent Trends in Civil Engineering and Built Environment. 4(2);317-325. https://doi.org/10.30880/rtcebe.2023.04.02.036
Hussain, T.H., Alwan, A.S., Al-Shammari, A.J., Hashim, T.M. and Naje, A.S. (2023). Degradation and Microstructure of Palmdate Fibers-High Performance Cementitious Boards Exposed to Aging Conditions. Key Engineering Materials. 951;185-197. https://doi.org/10.4028/p-bxbrh1 DOI: https://doi.org/10.4028/p-bXBrH1
Wilberforce, T., Olabi, A.G., Sayed, E.T., Elsaid, K. and Abdelkareem, M.A. (2021). Progress in carbon capture technologies. Science of The Total Environment. 761, 143203. https://doi.org/10.1016/j.scitotenv.2020.143203 DOI: https://doi.org/10.1016/j.scitotenv.2020.143203
Bejan, G., Bărbuță, M., Vizitiu, R.Ș. and Burlacu, A. (2020). Lightweight concrete with waste-review. Procedia Manufacturing. 46;136-143. https://doi.org/10.1016/j.promfg.2020.03.021 DOI: https://doi.org/10.1016/j.promfg.2020.03.021
Bui, H., Boutouil, M., Levacher, D. and Sebaibi, N. (2021). Evaluation of the influence of accelerated carbonation on the microstructure and mechanical characteristics of coconut fibre-reinforced cementitious matrix. Journal of Building Engineering. 39, 102269. https://doi.org/10.1016/j.jobe.2021.102269 DOI: https://doi.org/10.1016/j.jobe.2021.102269
Li, L., Liu, Q., Huang, T. and Peng, W. (2022). Mineralization and utilization of CO2 in construction and demolition wastes recycling for building materials: A systematic review of recycled concrete aggregate and recycled hardened cement powder. Separation and Purification Technology. 298, 121512. https://doi.org/10.1016/j.seppur.2022.121512 DOI: https://doi.org/10.1016/j.seppur.2022.121512
Laverde, V., Marin, A., Benjumea, J.M. and Ortiz, M.R. (2022). Use of vegetable fibers as reinforcements in cement-matrix composite materials: a review. Construction and Building Materials. 340, 127729. https://doi.org/10.1016/j.conbuildmat.2022.127729 DOI: https://doi.org/10.1016/j.conbuildmat.2022.127729
Wang, J., Che, Z., Zhang, K., Fan, Y., Niu, D. and Guan, X. (2023). Performance of recycled aggregate concrete with supplementary cementitious materials (fly ash, GBFS, silica fume, and metakaolin): Mechanical properties, pore structure, and water absorption. Construction and Building Materials. 368, 130455. https://doi.org/10.1016/j.conbuildmat.2023.130455 DOI: https://doi.org/10.1016/j.conbuildmat.2023.130455
Ma, X., He, T., Xu, Y., Yang, R. and Sun, Y. (2022). Hydration reaction and compressive strength of small amount of silica fume on cement-fly ash matrix. Case Studies in Construction Materials. 16, e00989. https://doi.org/10.1016/j.cscm.2022.e00989 DOI: https://doi.org/10.1016/j.cscm.2022.e00989
EL-Mously, H., Midani, M. and Darwish, E.A. (2023). Date Palm Byproducts in Fibers, Textiles and Composites. In Date Palm Byproducts: A Springboard for Circular Bio Economy. 103-128. https://doi.org/10.1007/978-981-99-0475-4_4 DOI: https://doi.org/10.1007/978-981-99-0475-4_4
Imraan, M., Ilyas, R.A., Norfarhana, A.S., Bangar, S.P., Knight, V.F. and Norrrahim, M.N.F. (2023). Sugar palm (Arenga pinnata) fibers: new emerging natural fibre and its relevant properties, treatments and potential applications. Journal of Materials Research and Technology. 24;4551-4572. https://doi.org/10.1016/j.jmrt.2023.04.056 DOI: https://doi.org/10.1016/j.jmrt.2023.04.056
Olupot, P.W., Menya, E., Lubwama, F., Ssekaluvu, L., Nabuuma, B. and Wakatuntu, J. (2022). Effects of sawdust and adhesive type on the properties of rice husk particleboards. Results in Engineering. 16, 100775. https://doi.org/10.1016/j.rineng.2022.100775 DOI: https://doi.org/10.1016/j.rineng.2022.100775
Bagal, D.K., Singh, S.K., Naik, B., Barua, A., Jeet, S., Parida, B. and Pattanaik, A.K. (2020). Recent developments and future prospects of manufacturing of broad gauge railway sleepers using waste materials in India. IOP Conference Series: Materials Science and Engineering. 970(1), 012002. https://doi.org/10.1088/1757-899x/970/1/012002 DOI: https://doi.org/10.1088/1757-899X/970/1/012002
Tadi, S.B. and Pancharathi, R.K., 2023, March. CO2 Curing for Enhanced Early Age Strength in Saw Dust Biochar Augmented Cement Mortars. In International Conference on Cement and Building Koncrete for a Sustainable and Resilient Infrastructure. 63-75. https://doi.org/10.1007/978-981-99-7464-1_6 DOI: https://doi.org/10.1007/978-981-99-7464-1_6
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 International Journal of Computational and Experimental Science and Engineering
This work is licensed under a Creative Commons Attribution 4.0 International License.
